Assembly systems

for RIVNUT® blind rivet nuts and RIVSTUD® blind rivet studs

  1. Böllhoff USA >
  2. Systems & Automation >
  3. Setting tools

Creating threads on thin-walled components

RIVNUT® blind rivet nuts are the most versatile solution for fastening high-strength nut or bolt threads to components when tapped threads are not possible due to small wall thicknesses.

Get an overview of our assembly solutions.

 

Characteristics

RIVNUT® blind rivet nuts and studs

For internal and external threads of components with small wall thicknesses, Böllhoff offers RIVNUT® blind rivet nuts and studs. These elements are mounted without counter pressure ("blindly") and can therefore also be set at hollow sections.
RIVNUT® blind rivet nuts and studs are available in many variations and sizes and therefore offer numerous fastening solutions with additional functions.

Get information about our different versions of blind rivet nuts and studs and have a look at realised applications.

+ RIVNUT® blind rivet nuts

Technology

Blind rivet nuts

RIVNUT® blind rivet nuts and studs can easily be used in metal or plastic components as well as in many other material combinations.
Often for hollow bodies, profiles, housings or components with one-sided accessibility, the economical setting of the blind rivet nut and stud is the only possible solution.

Benefits

  • Stable thread on thin-walled components
  • Installation in case of one-sided accessibility (blind assembly)
  • 2 functions (riveting and screwing)
  • Flexible application for every production step
  • The workpiece is not exposed to thermal stress.
  • Low capital expenditure

Setting

Example of a spindle lifting procedure

Here, the RIVNUT® blind rivet nut and stud is spinned on, upset and afterwards spinned off.

Blind rivet nut setting principle

Get information about our different versions of blind rivet nuts and studs and have a look at realised applications.

+ RIVNUT® blind rivet nuts

Power tools

Manual Assembly

Pneumatic / Hydraulic Tools

  • Battery setting tool RIVNUT® B2007 for an easy and autonomous setting

    New! Battery setting tool RIVNUT® B2007 for an easy and autonomous setting

    • Force setting technology with precise self-setting of force load
    • Energy self-sufficient
    • Significant autonomy (from 650 to 800 cycles)
    • Electro-hydraulic technology (good repeatability and reliability)
    • Powerful (M 3 to M 10 Steel)
    • Built for intensive use (hard qualification achieved, optimised assembly)
  • P2005

    P2005 Spin-pull to Stroke

    The P2005 tool installs the RIVNUT® or RIVSTUD® by pull to stroke control.

    • Single stage trigger controls complete installation sequence
    • Automatic timed reverse spin and stop for maximum speed
    • Installs 20 to 30 pieces per minute
    • Ergonomic grip and balance for operator comfort
    • Weight: 4.5 lbs. (2.36kg)
    • Max. Stroke: .275 in. (7,0mm)
    • Max. Pull Force: 4700 lbs. (17kN)
    • 80 PSI (5.5 BAR) of clean dry air required for operation
  • P2007 / P2007PN

    P2007 / P2007PN Spin-pull to Pressure

    The P2007 will install M3 - M10 RIVNUT® fasteners or RIVSTUD® fasteners into a variety of thicknesses using pull to pressure technology.

    • Single stage trigger controls complete installation sequence
    • Automatic timed reverse spin and stop for maximum speed
    • Installs 20 to 30 pieces per minute
    • Ergonomic grip and balance for operator comfort
    • Lightweight and compact: 4.9 lbs. (2.2 kg)
    • Max. Stroke: .275 in. (7mm), (14mm for P2007PN)
    • Max. Pull Force: 4700 lbf. (21 kN)
    • 80 PSI (5.5 Bar) of clean dry air required for operation
  • P1007

    P1007 Lightweight Spin-pull to Pressure

    The P1007 will install M3 - M6 RIVNUT® fasteners or RIVSTUD® fasteners into a variety of thicknesses using pull to pressure technology.

    • Single stage trigger controls complete installation sequence
    • Automatic timed reverse spin and stop for maximum speed
    • Installs 20 to 30 pieces per minute
    • Ergonomic grip and balance for operator comfort
    • Lightweight and compact: 4.0 lbs. (1.8 kg)
    • Max. Stroke: .275 in. (7mm)
    • Max. Pull Force: 2900 lbf. (13 kN)
    • 80 PSI (5.5 Bar) of clean dry air required for operation
  • P3007 / P3007PN

    P3007 / P3007PN High Strength Spin-pull to Pressure

    The P3007 will install M10 - M12 HRT RIVNUT® or RIVSTUD® fasteners into a variety of thicknesses using pull to pressure technology.

    • Single stage trigger controls complete installation sequence
    • Automatic timed reverse spin and stop for maximum speed
    • Installs 20 to 30 pieces per minute
    • Ergonomic grip and balance for operator comfort
    • Compatible with M10 and M12 RIVNUT® HRT products
    • Max. Stroke: .275 in. (7mm)
    • Max. Pull Force: 7,800 lbf. (35 kN)
    • 80 PSI (5.5 Bar) of clean dry air required for operation
Automatic assembly

  • Tool with process control EPK C

    EPK C Electronically Operated Spin-pull to Pressure Pneumatic / Hydraulic Tool

    The EPK C tool installs the RIVNUT® or RIVSTUD® fastener by pull to pressure control.

    • Electronic Controls with process monitoring
    • Installs 20 to 30 pieces per minute
    • Available in pistol or inline version
    • Tool Weight (pistol version): 5.1 lbs. (2.3 kg)
    • Max. Stroke: .250 in. (6.5 mm)
    • Max. Pull Force: 4,700 lbs. (21 kN)
    • 90 PSI (6.0 BAR) of clean dry air
    • 230V-single phase 50/60HZ
  • SAC 310

    SAC310: Modular, semi-automatic setting head (spindle stroke principle, hydraulic pneumatic)

    The SAC310 is a light, compact setting head designed for the semi-automatic installation of RIVNUT® fasteners and RIVSTUD® fasteners.

    • Automatic loading by mandrel pressure
    • Pneumatic/Hydraulic setting
    • Automatic spin off
    • Process monitoring available
    • Data output feature available
  • HSA 803

    HSA 803 Spin-pull to Pressure Pneumatic/Hydraulic Automation Tool

    The HSA 803 installs the RIVNUT® by pull to pressure control.

    • Installs 20 pieces per minute
    • Auto feed or pick and place capability
    • Full electronic controls and process monitoring
    • Quick change mandrel requires no tools
    • Axis compensator for robotic installations
    • Slip shaft for cross-thread detection

Please view also our fastener / tool selection guide, which you will find in our RIVNUT® blind rivet nuts product catalogue down below.

Hand tools



Manual setting tools

Hand-operated setting tool M2007
(M 5 to M 12)

Hand-operated setting tool RIVKLE® M2007

Plier-type setting tool
Z 305
(M 2 to M 5)

RIVKLE® Z305 (M 3 - M 5)
weiss

Please view also our fastener / tool selection guide, which you will find in our RIVNUT® blind rivet nuts product catalogue down below.

Download Version Language Type/Size
RIVNUT®
The Original Blind Rivet Nut
09/2010 English PDF / 3204 KB
RIVNUT® B2007
The RIVNUT® Battery tool
RN B2007 05/16 ENG English PDF / 2831 KB

If you are not able to open the document, please install the Adobe Acrobat Reader.



News

Böllhoff in the news!

News & press

Overview

You find further information in our overview of products and services.

Download center

Contact

You need any product information or support?

Contact

RIVNUT® B2007 – Electro-hydraulic technology

RIVKLE® blind rivet nuts - Assembly with SAC 310

RIVKLE® blind rivet nuts - Assembly with HSA 803


BÖLLHOFF

Copyright © 2013 Bollhoff Inc.